HARDINGE 4678W 80DL DRAW BAR ADAPTER FOR FLEX C 80 CHUCK MACHINE SHOP TOOLING

YOU ARE PURCHASING THE PICTURED ADAPTER.

I HAVE LISTED IT AS USED BUT I THINK IT IS ACTUALLY NEW / UNUSED.  I WAS NOT SURE SO I LISTED IT AS USED.

SOLD BY M & J TOOLING LLC
DAYTON, OH

IT IS LABELED:

4687W

80DL

HARDINGE

IT IS 5-1/2" IN DIAMETER.

THE LARGE END OF THE TAPER ON THE INSIDE IS ABOUT 2.170

THE 4 MOUNTING HOLES ARE .265 THRU AND ARE ON A 4-11/16" BOLT CIRCLE.

THE BOSS STICKING OUT ON THE THREADED SIDE IS 3.980 DIAMETER.

THE OVERALL LENGTH IS 1.640

THE BOSS STICKING OUT ON THE TAPERED SIDE IS 3.370 DIAMETER.

ALL DIMENSIONS WERE MEASURED WITH DIAL CALIPERS AND ARE NOT EXACT.  PLEASE EBAY MESSAGE ME IF YOU NEED ADDITIONAL MEASUREMENTS.

I USUALLY SHIP (95%) OF MY LISTINGS SAME DAY IF PAID FOR BY 3:00 P.M. EST.  

PLEASE SEE MY OTHER LISTINGS FOR MORE GREAT VALUES!

I WILL COMBINE SHIPPING WHENEVER POSSIBLE.

I WILL SHIP WORLDWIDE.

THE FREE SHIPPING OFFER IS FOR UNITED STATES RESIDENTS ONLY. PLEASE SEE THE INTERNATIONAL SHIPPING COST POSTED IN THE LISTING IF YOU ARE AN INTERNATIONAL BUYER.

THANK YOU!

LOCATION: 11-1-E-5