End Mills

REGROUND USA 2" DIAMETER 3/8" RADIUS END MILL 1.960 DIA. 6 FLUTE HSS MELIN 2.0

YOU ARE PURCHASING THE PICTURED END MILL.SOLD BY M & J TOOLING LLC DAYTON, OHIO PRODUCT SPECIFICATIONS AND / OR LABELING:CONDITION:     NEWIT HAS BEEN REGROUND / SHARPENED TO APROXIMATELY 1.960 WITH A 3/8" RADIUS ON THE...

REGROUND USA 2" DIAMETER 3/4" RADIUS END MILL 1.950 DIA. 6 FLUTE HSS MELIN 2.0

YOU ARE PURCHASING THE PICTURED END MILL.SOLD BY M & J TOOLING LLC DAYTON, OHIO PRODUCT SPECIFICATIONS AND / OR LABELING:CONDITION:     USEDIT HAS BEEN REGROUND TO APROXIMATELY 1.950 WITH A 3/4" RADIUS ON THE END.SIZE /...

UNKNOWN

1" DIA INDEXABLE INSERT END MILL SQUARE SHOULDER 3 INSERT KENNAMETAL ? SECO ?

YOU ARE PURCHASING THE PICTURED END MILL.SOLD BY M & J TOOLING LLC DAYTON, OHIO PRODUCT SPECIFICATIONS AND / OR LABELING:CONDITION:     USEDIT IS MISSING 2 INSERT SCREWS. I DO NOT KNOW THE BRAND. LET ME KNOW IF YOU...

RK CUTTING TOOLS IEM B0750 S0750 8 35N 3/4" SHANK PROFILING END MILL INDEXABLE

YOU ARE PURCHASING THE PICTURED END MILL.SOLD BY M & J TOOLING LLC DAYTON, OHIO PRODUCT SPECIFICATIONS AND / OR LABELING:CONDITION:     USEDRK CUTTING TOOLS IEM B0750 S0750 8 35NSIZE / LABELING:     THE...

K TOOL

K TOOL BC6 2000 2" DIAMETER END MILL WITH 1" SHANK ROUND INSERT MISSING SCREWS

YOU ARE PURCHASING THE PICTURED END MILL.SOLD BY M & J TOOLING LLC DAYTON, OHIO PRODUCT SPECIFICATIONS AND / OR LABELING:CONDITION:     USEDIT IS MISSING THE INSERT SCREWS.SIZE / LABELING:     K TOOL BC6...

K TOOL

K TOOL BC3 1000 L 1" DIAMETER END MILL WITH 1" SHANK ROUND INSERT 1.00 X 1.0

YOU ARE PURCHASING THE PICTURED END MILL.SOLD BY M & J TOOLING LLC DAYTON, OHIO PRODUCT SPECIFICATIONS AND / OR LABELING:CONDITION:     USEDTHE 2 INSERT POCKETS ARE 100% INTACT., LIGHT RUB DAMAGE NEAR WORKING ENDSIZE /...

INGERSOLL

INGERSOLL 15W1Z0699R01 SINGLE FLUTE END MILL 3/4" DIA. SHANK CARBIDE INSERT .750

YOU ARE PURCHASING THE PICTURED END MILL.SOLD BY M & J TOOLING LLC DAYTON, OHIO PRODUCT SPECIFICATIONS AND / OR LABELING:CONDITION:     USEDTHE INSERT POCKET IS 100% INTACT.SIZE / LABELING:     INGERSOLL...

SECO

SECO R217.69 0.200 3 18S3AN HIGH FEED INDEXABLE INSERT END MILL 2" DI 1.5 SHANK

YOU ARE PURCHASING THE PICTURED END MILL.SOLD BY M & J TOOLING LLC DAYTON, OHIO PRODUCT SPECIFICATIONS AND / OR LABELING:CONDITION:     USEDPLEASE SEE ALL PICTURES FOR CONDITION AND ANY MODIFICATIONS.SIZE /...

VALENITE

VALENITE 2" DIA 1 1/4" SHANK DIA INDEXABLE INSERT END MILL VE90-AS200-W125 2.0

YOU ARE PURCHASING THE PICTURED END MILL.SOLD BY M & J TOOLING LLC DAYTON, OHIO PRODUCT SPECIFICATIONS AND / OR LABELING:CONDITION:     USEDTHIS HAS RUB MARKS AROUND WORKING END, HAS LIGHT DAMAGE TO INSERT POCKETS, HOLDS...

K TOOL

K TOOL 1 1/4" DIA 1" SHANK INDEXABLE INSERT PORTING TOOL A 9123 1.250 1.00

YOU ARE PURCHASING THE PICTURED PORTING TOOL.SOLD BY M & J TOOLING LLC DAYTON, OHIO PRODUCT SPECIFICATIONS AND / OR LABELING:CONDITION:     USEDSIZE / LABELING:     APPROX 1.250 CUTTING DIA, THIS HOLDS AND...

KENNAMETAL 40 mm DIA 32 mm SHANK INDEXABLE T-SLOT CUTTER KTMS40S32SD12H

YOU ARE PURCHASING THE PICTURED END MILL.SOLD BY M & J TOOLING LLC DAYTON, OHIO PRODUCT SPECIFICATIONS AND / OR LABELING:CONDITION:     USED40 mm DIA 32 mm SHANK DIA APPROX 1.560 CUTTING DIA, THERE ARE RUB MARKS ON...

QUINCO 2" DIAMETER HSS 6 FLUTE SPIRAL FLUTE BALL NOSE END MILL 2.0 2.00 2.000

YOU ARE PURCHASING THE PICTURED END MILL.SOLD BY M & J TOOLING LLC DAYTON, OHIO PRODUCT SPECIFICATIONS AND / OR LABELING:CONDITION:     USEDTHERE IS A CHIP ON A TOOTH - SEE PICTURESSIZE / LABELING:   ...