OSG 0.5mm 2 Flute Single End Carbide 0.05mm Corner Radius Spiral Flute End Mill
OSG
$38.24
Write a Review
OSG
OSG 0.5mm 2 Flute Single End Carbide 0.05mm Corner Radius Spiral Flute End Mill
YOU ARE PURCHASING THE PICTURED END MILL.
IT IS NEW.
SOLD BY M & J TOOLING LLC.
DAYTON, OH
PRODUCT SPECIFICATIONS AND OR LABELING:
| Mill Diameter (mm) | 0.50 |
| Mill Diameter (Decimal Inch) | 0.0197 |
| End Type | Corner Radius |
| Corner Radius (mm) | 0.050 |
| Corner Radius (Decimal Inch) | 0.0020 |
| Number of Flutes | 2 |
| Material | Solid Carbide |
| Finish/Coating | WXS |
| Length of Cut (mm) | 0.40 |
| Length of Cut (Decimal Inch) | 0.0157 |
| Shank Diameter (mm) | 4.00 |
| Overall Length (mm) | 50.00 |
| Flute Type | Spiral |
| Reach Length (mm) | 4.00 |
| Helix Angle | 30.00 |
| Neck Diameter (mm) | 0.46 |
| Single or Double End | Single |
| Length Type | Stub |
| Centercutting | Yes |
| Cutting Direction | Right Hand |
| Flute Direction | Right Hand |
| Extended Reach | Yes |
| Series/List | 4592 |
I WILL SHIP WORLDWIDE.
WE CHARGE $6.00 FOR THE FIRST ITEM THAT IS SHIPPED. THEN FOR EACH ADDTIONAL ITEM THAT YOU PURCHASE, THE COST DROPS DOWN TO $3.00 EACH.
I USUALLY SHIP (95%) OF MY LISTINGS SAME DAY IF PAID FOR BY 3:00 P.M. EST.
PLEASE SEE MY OTHER LISTINGS FOR MORE GREAT VALUES!
I WILL COMBINE SHIPPING WHENEVER POSSIBLE.
THANK YOU!
LOCATION: FR-6-2-H-1