KENNAMETAL 4" O.D. FACE MILL KSSR338LF355 1 1/4" PILOT HOLDS 6 INSERTS 4.0 KSSR - MH3112AG3
$249.99
Write a Review
KENNAMETAL 4" O.D. FACE MILL KSSR338LF355 1 1/4" PILOT HOLDS 6 INSERTS 4.0 KSSR - MH3112AG3
YOU ARE PURCHASING THE PICTURED FACE MILL.
SOLD BY M & J TOOLING LLC
DAYTON, OHIO
PRODUCT SPECIFICATIONS:
CONDITION:
USED
PLEASE SEE PICTURES FOR CONDITION. ALL INSERT POCKETS ARE 100% INTACT. ALL HARDWARE IS IN IT.
CUTTING DIAMETER & LABELING:
4"
KSSR338LF355
THE 4" CUT DIAMETER IS MEASURED FROM THE OUTSIDE OF THE INSERTS. CENTER TO CENTER OF THE INSERTS MEASURES about 3-3/8" approximately!
PILOT / ARBOR DIAMETER & KEYWAY WIDTH:
1 1/4" PILOT PILOT DIAMETER
1/2" KEY KEYWAY WIDTH
MANUFACTURER / BRAND:
KENNAMETAL
SOLD BY M & J TOOLING LLC
DAYTON, OHIO
PRODUCT SPECIFICATIONS:
CONDITION:
USED
PLEASE SEE PICTURES FOR CONDITION. ALL INSERT POCKETS ARE 100% INTACT. ALL HARDWARE IS IN IT.
CUTTING DIAMETER & LABELING:
4"
KSSR338LF355
THE 4" CUT DIAMETER IS MEASURED FROM THE OUTSIDE OF THE INSERTS. CENTER TO CENTER OF THE INSERTS MEASURES about 3-3/8" approximately!
PILOT / ARBOR DIAMETER & KEYWAY WIDTH:
1 1/4" PILOT PILOT DIAMETER
1/2" KEY KEYWAY WIDTH
MANUFACTURER / BRAND:
KENNAMETAL
THANK YOU FOR YOUR BUSINESS!
LOCATION: WB14-2-3-3