Products

S.G. CO.

3/8 32 UNEF 2A SPECIAL THREAD RING GAGES .375 GO NO GO P.D.'S = .3529 & .3499 - DW39723LVR

YOU ARE PURCHASING THE PICTURED RIGHT HAND SPECIAL THREAD RING GAGES.SOLD BY M & J TOOLING LLCDAYTON, OHIO

GSG

CERTIFIED 1/2 13 UNC 3A SET THREAD PLUG GAGE .5 GO NO GO P.D.'S = .4500 & .4463 - DW39722TLC

YOU ARE PURCHASING THE PICTURED RIGHT HAND CERTIFIED SET THREAD PLUG GAGE.THESE GAGES ARE USED FOR CALIBRATIN

CAT40 COMMAND #2 TAPPING CHUCK TOOL HOLDER C4T4-0002 EXTENDED 6" PROJECTION - NS5037DH5

YOU ARE PURCHASING THE PICTURED CAT40 TAPPING CHUCK TOOL HOLDER.

CAT40 COMMAND #2 TAPPING CHUCK TOOL HOLDER C4T4-0002 EXTENDED 6" PROJECTION - NS5036DH5

YOU ARE PURCHASING THE PICTURED CAT40 TAPPING CHUCK TOOL HOLDER.

CAT40 #2 QUICK CHANGE TAPPING CHUCK TOOL HOLDER EXTENDED 6" PROJECTION - NS5035DH5

YOU ARE PURCHASING THE PICTURED CAT40 TAPPING CHUCK TOOL HOLDER.

CAT40 COMMAND #2 TAPPING CHUCK TOOL HOLDER C4T4-0002 EXTENDED 6" PROJECTION - NS5034DH5

YOU ARE PURCHASING THE PICTURED CAT40 TAPPING CHUCK TOOL HOLDER.

CAT40 COLLIS #1 QUICK CHANGE TAPPING CHUCK TOOL HOLDER EXTENDED 5" PROJECTION - NS5033DH5

YOU ARE PURCHASING THE PICTURED CAT40 TAPPING CHUCK TOOL HOLDER.

CAT40 COMMAND #1 QUICK CHANGE TAPPING CHUCK TOOL HOLDER C4T4-0001 4" PROJECTION - NS5032DH5

YOU ARE PURCHASING THE PICTURED CAT40 TAPPING CHUCK TOOL HOLDER.

CAT40 1 1/2 PILOT O.D. 5/8 KEY WIDTH FACE MILL TOOL HOLDER 2" PROJECTION 1.5 - NS5031DH5

YOU ARE PURCHASING THE PICTURED CAT40 FACE MILL TOOL HOLDER.

CAT40 3/4 PILOT O.D. 5/16 KEY WIDTH FACE / SHELL MILL TOOL HOLDER EXTENDED .75 - NS5028DH5

YOU ARE PURCHASING THE PICTURED CAT40 FACE MILL TOOL HOLDER.

CAT40 PRECISION COMPONENTS 3/16 ID SOLID END MILL TOOL HOLDER CAT-40-.187-4 - NS5026DH5

YOU ARE PURCHASING THE PICTURED CAT40 SOLID END MILL TOOL HOLDER.

CAT40 LYNDEX 1/8 ID SOLID END MILL TOOL HOLDER .125 2 1/4 PROJECTION C4006-0125 - NS5025DH5

YOU ARE PURCHASING THE PICTURED CAT40 SOLID END MILL TOOL HOLDER.