Products

SCT 3/8 - 24 AlTIN CARBIDE THREAD MILL 5/16 SHANK 4 FLUTE TM290-24A USA .375 - JG1415LVR

YOU ARE PURCHASING THE PICTURED END MILL.

HSK63A GUHRING 20mm I.D. HYDRAULIC CHUCK TOOL HOLDER 20mm 4" PROJECTION 18046451 - JG1414LVR

YOU ARE PURCHASING THE PICTURED HSK63A HYDRAULIC TOOL HOLDER.

NMTB40 1 1/4 I.D. SOLID END MILL TOOL HOLDER 1.25 2 3/4 PROJECTION 2.75 - JG1413LVR

YOU ARE PURCHASING THE PICTURED NMTB40 SOLID END MILL TOOL HOLDER.

LYNDEX

CAT50 LYNDEX TG75 COLLET CHUCK TOOL HOLDER 3 1/4 PROJECTION TG 75 - JG1412LVR

YOU ARE PURCHASING THE PICTURED CAT50 COLLET CHUCK TOOL HOLDER.

ISCAR 3/8 DIA. INDEXABLE END MILL HM90 E90A D.38-1-W.50 1/2 SHANK SINGLE FLUTE - JG1402LVR

YOU ARE PURCHASING THE PICTURED INDEXABLE INSERT END MILL.

ISCAR 3/8 DIA. INDEXABLE END MILL E90X-D.38-W.50-06 1/2 SHANK SINGLE FLUTE .375 - JG1400CE4

YOU ARE PURCHASING THE PICTURED INDEXABLE INSERT END MILL.

INGERSOLL 4" O.D. FACE MILL TFM45SED4.00R-12 1 1/2 PILOT 6 POCKETS SEKT12T3 4.0 - JG1391CH5

YOU ARE PURCHASING THE PICTURED FACE MILL.

3 3/4" O.D. FACE MILL STS-107790400 1 1/4 PILOT HOLDS 6 INSERTS CCMT32.51, RC-22 - JG1390BL5

YOU ARE PURCHASING THE PICTURED FACE MILL.

INGERSOLL 4" O.D. COOLANT FACE MILL 5M6P-40R01 1 1/2 PILOT 8 POCKETS SD1305 4.0 - JG1389BL5

YOU ARE PURCHASING THE PICTURED FACE MILL.

WALTER 2" O.D. FACE MILL 6026-0320F 26814 1/2 PILOT 4 POCKETS RP..1605 2.0 USA - JG1388CE4

YOU ARE PURCHASING THE PICTURED FACE MILL.

INGERSOLL 2" O.D. FACE MILL 5W6H02R01 3/4 PILOT HOLDS 4 INSERTS RP..1204 2.0 - JG1387CE4

YOU ARE PURCHASING THE PICTURED FACE MILL.

MILLSTAR 2" O.D. FACE MILL HFA-2000/5 3/4 PILOT 5/16 KEY HOLDS 5 INSERTS 2.0 - JG1386CE4

YOU ARE PURCHASING THE PICTURED FACE MILL.