Products

SGS 1/2 O.D. 3/4 LOC 6" OAL CARBIDE END MILL 1/2 SHANK 2 FLUTE 34642 .5 USA - JG1100CG5

YOU ARE PURCHASING THE PICTURED END MILL.

NEW 8pcs NTM 0.115 O.D. 1/2 LOC CARBIDE END MILL 1/8 SHANK 2 FLUTE 776275 .115 - JG1099CG5

YOU ARE PURCHASING THE PICTURED END MILL.

NEW 9pcs NTM 0.115 O.D. CARBIDE END MILL 1/8 SHANK 2 FL 776275 .115 12 DEG TAPER - JG1098CG5

YOU ARE PURCHASING THE PICTURED END MILL.

NEW 14pcs NTM 0.024 O.D. 0.195 LOC CARBIDE END MILL 1/8 SHANK 2 FL 18 DEG TAPER - JG1097CG5

YOU ARE PURCHASING THE PICTURED END MILL.

13pcs NEW NTM 1/8" O.D. 1/4 LOC 24 DEG TAPER CARBIDE END MILL 2 FL J#116126 .125 - JG1096CG5

YOU ARE PURCHASING THE PICTURED END MILL.

10pcs NEW NTM 1/8" O.D. 1/4 LOC 24 DEG TAPER CARBIDE END MILL 2 FL J#116126 .125 - JG1095CG5

YOU ARE PURCHASING THE PICTURED END MILL.

HARVEY TOOL 0.031 O.D. AlTiN BALL NOSE CARBIDE END MILL 1/8 SHANK 3 FL 32231-C3 - JG1094CG5

YOU ARE PURCHASING THE PICTURED END MILL.

NEW HARVEY TOOL 1/16 O.D. AlTiN BALL NOSE CARBIDE END MILL 4 FL 801562-C3 .0625 - JG1093CG5

YOU ARE PURCHASING THE PICTURED END MILL.

3pcs HARVEY TOOL 3/16 O.D. 1 1/2 LOC CARBIDE END MILL 0.1875 SHANK 4 FL 33712-C3 - JG1092CG5

YOU ARE PURCHASING THE PICTURED END MILL.

SGS

NEW SGS 3/4 O.D. 1.65 LOC 4" OAL CARBIDE END MILL 3/4 SHANK 4 FLUTE 36442 .75 - JG1091CG5

YOU ARE PURCHASING THE PICTURED END MILL.

HEMCO

3 1/2 12 N 2 LEFT HAND THREAD PLUG GAGE 3.5 GO ONLY P.D. = 3.4459 UN-2 2B OR 3B - DW38899LVR

YOU ARE PURCHASING THE PICTURED LEFT HAND THREAD PLUG GAGE.SOLD BY M & J TOOLING LLCDAYTON, OHIO

ALAMEDA

1 1/2 8 UN THREAD PLUG GAGE 1.5 1.50 1.500 1.5000 GO ONLY P.D. = 1.4188 2B OR 3B - DW38898LVR

YOU ARE PURCHASING THE PICTURED RIGHT HAND THREAD PLUG GAGE.SOLD BY M & J TOOLING LLCDAYTON, OHIO