Products

GODWIN

3/4 20 UNEF 3A SET THREAD PLUG GAGE .75 .750 GO NO GO P.D.'S = .7175 & .7142 - DW38884LVR

YOU ARE PURCHASING THE PICTURED RIGHT HAND SET THREAD PLUG GAGE.THESE GAGES ARE USED FOR CALIBRATING THREAD R

ALAMEDA

1 1/4 16 UNS 2A THREAD RING GAGE 1.25 1.250 1.2500 GO ONLY P.D. = 1.2079 CHECK - DW38883LVR

YOU ARE PURCHASING THE PICTURED RIGHT HAND THREAD RING GAGE.SOLD BY M & J TOOLING LLCDAYTON, OHIO

M8 X .75 6g METRIC THREAD RING GAGES 8 0.75 GO NO GO P.D.'S = 7.491 & 7.391 - DW38882LVR

YOU ARE PURCHASING THE PICTURED RIGHT HAND THREAD RING GAGES.SOLD BY M & J TOOLING LLCDAYTON, OHIO<

VARGUS VARDEX M10 X 1.25 CARBIDE THREAD MILL 3/8 SHANK 3 FLUTE HC37335L08 10 mm - JG1068CG5

YOU ARE PURCHASING THE PICTURED END MILL.

SGS 3/8 O.D. 1 1/2 LOC 3 1/2 OAL CARBIDE END MILL 3/8 SHANK 3 FLUTE 34711 .375 - JG1066CG5

YOU ARE PURCHASING THE PICTURED END MILL.

SGS 3/8 O.D. 2 1/2 LOC 4 1/4 OAL CARBIDE END MILL 3/8 SHANK 2 FLUTE 34513 .375 - JG1065CG5

YOU ARE PURCHASING THE PICTURED END MILL.

SGS 3/4" O.D. 1 3/8 LOC 6" OAL CARBIDE END MILL 3/4 SHANK 3 FLUTE 32716 .75 - JG1061CG5

YOU ARE PURCHASING THE PICTURED END MILL.

REDLINE TOOLS 3/4 O.D. 3" LOC CARBIDE END MILL 3/4 SHANK 2 FLUTE RE12248 .75 - JG1060CG5

YOU ARE PURCHASING THE PICTURED END MILL.

SGS 1/2 O.D. 2" LOC 4 1/2 OAL CARBIDE END MILL 1/2 SHANK 2 FLUTE 30363 .5 USA - JG1059CG5

YOU ARE PURCHASING THE PICTURED END MILL.

DESIGN-RITE XL 1/2 O.D. 1.075 LOC TiCN CARBIDE END MILL 4 FL D6441502 .5 USA - JG1057CG5

YOU ARE PURCHASING THE PICTURED END MILL.

SGS 1/2 O.D. 1 1/4 LOC 3 1/4 OAL CARBIDE END MILL 1/2 SHANK 2 FLUTE 34625 .5 USA - JG1053CG5

YOU ARE PURCHASING THE PICTURED END MILL.

NIAGARA 5/8 O.D. 2 3/4 LOC 5" OAL CARBIDE END MILL 5/8 SHANK 2 FLUTE 61384 .625 - JG1052CG5

YOU ARE PURCHASING THE PICTURED END MILL.