Products

0.216 O.D. CARBIDE REAMER 4 FLUTE .216 .2160 7/32 .2188 -.0028 UNDERSIZE - NS7160CM4

YOU ARE PURCHASING THE PICTURED REAMER.

0.136 O.D. HSS CHUCKING REAMER 4 FLUTE .136 .1360 1/8 .1250 +.0110 OVERSIZE #29 - NS7159CM4

YOU ARE PURCHASING THE PICTURED REAMER.

0.197 OD HSS CHUCKING REAMER 6 FLUTE .197 .1970 3/16 .1875 +.0095 OVERSIZE 5 mm - NS7158CM4

YOU ARE PURCHASING THE PICTURED REAMER.

0.189 OD HSS CHUCKING REAMER 6 FLUTE .189 .1890 3/16 .1875 +.0015 OVERSIZE #12 - NS7157CM4

YOU ARE PURCHASING THE PICTURED REAMER.

GLENBARD 0.3142 OD HSS REAMER SPIRAL 6 FL .3142 5/16 .3125 +.0017 OVERSIZE 8 mm - NS7156CM4

YOU ARE PURCHASING THE PICTURED REAMER.

2 25/32 O.D. HSS TWIST DRILL BIT MORSE TAPER #5 SHANK 10 5/8 LOC 2.7812 MT5

YOU ARE PURCHASING THE PICTURED  DRILL BIT.

1 1/8 DIA. SQUARE SHOULDER INDEXABLE END MILL 1 1/4 SHANK 2 FLUTE 1.125 - JG5099AT5

YOU ARE PURCHASING THE PICTURED INDEXABLE INSERT END MILL.

NEW OSG 11/16 O.D. 1 11/16 LOC HSS END MILL 5/8 SHANK 4FL 57424 .6875 HYPRO-V - JG5095AT5

YOU ARE PURCHASING THE PICTURED END MILL.

CARBOLOY 2" O.D. FACE MILL R220.69-02.00-16 3/4 PILOT 5 POCKETS AP-1604 2.0 - JG5093AT5

YOU ARE PURCHASING THE PICTURED FACE MILL.

KENNAMETAL 2" O.D. FACE MILL KSSR200SP10T30F3 3/4 PILOT 6 POCKETS SP..10T3 2.0 - JG5092AT5

YOU ARE PURCHASING THE PICTURED FACE MILL.

CARBOLOY

CARBOLOY 3" O.D. FACE MILL R220.69-03.00-16 523 1" PILOT 7 POCKETS AP-1604 3.0 - JG5091AT5

YOU ARE PURCHASING THE PICTURED FACE MILL.

VERMONT GAGE

1 1/16 16 UN 2A VERMONT THREAD RING GAGES 1.0625 GO NO GO PD'S = 1.0204 & 1.0154 - DW41927BG6

YOU ARE PURCHASING THE PICTURED RIGHT HAND THREAD RING GAGES.SOLD BY M & J TOOLING LLCDAYTON, OHIO<