Milling

PARLEC

PARLEC BACK SPOT FACE TOOL 1" SHANK X 3/8" WORKING END CNC MILL TOOLING 1.0 .375

YOU ARE PURCHASING THE PICTURED ITEM.SOLD BY M & J TOOLING LLC DAYTON, OHIO PRODUCT SPECIFICATIONS AND / OR LABELING:CONDITION:     USEDIT OPENS AND CLOSES PROPERLY.SIZE / LABELING:     PARLEC 193805 MADE...

SANDVIK

SANDVIK RA290 90-203R63-15H FACE MILL 203mm DIAMETER X 2-1/2" PILOT X 1" KEYS

YOU ARE PURCHASING THE PICTURED ITEM.SOLD BY M & J TOOLING LLC DAYTON, OHIO PRODUCT SPECIFICATIONS AND / OR LABELING:CONDITION:     USEDALL HARDWARE IS MISSING. INSERT POCKETS ARE 100% INTACT.SIZE / LABELING: ...

SANDVIK

SANDVIK RA260.7-200 7-7/8" DIAMETER ANGLED FACE MILL 2-1/2" PILOT X 1" KEYS 1.0

YOU ARE PURCHASING THE PICTURED ITEM.SOLD BY M & J TOOLING LLC DAYTON, OHIO PRODUCT SPECIFICATIONS AND / OR LABELING:CONDITION:     USEDTHE BOLT CIRCLE IS 4" DIAMETER. PLEASE SEE ALL PICTURES FOR CONDITION.SIZE /...

1CHIPPED TOOTH 1" DIAMETER SOLID CARBIDE END MILL 4 FLUTE CENTER CUTTING GARR

YOU ARE PURCHASING THE PICTURED END MILL.SOLD BY M & J TOOLING LLC DAYTON, OHIO PRODUCT SPECIFICATIONS AND / OR LABELING:CONDITION:     USED1 TOOTH IS CHIPPED RIGHT AT THE END CORNER. STILL PLENTY OF LIFE LEFT IN IT FOR...

INGERSOLL

INGERSOLL 1-1/4" DIA. INDEXABLE INSERT END MILL / FACE MILL 3 FLUTE COOLANT THRU

YOU ARE PURCHASING THE PICTURED END MILL.SOLD BY M & J TOOLING LLC DAYTON, OHIO PRODUCT SPECIFICATIONS AND / OR LABELING:CONDITION:     USEDTHE INSERT POCKETS ARE 100% INTACT.SIZE / LABELING:     INGERSOLL...

INGERSOLL

INGERSOLL CHASEMILL 1-1/2" INDEXABLE INSERT END MILL TEF D1.50 W1.25 AP17 1.50

YOU ARE PURCHASING THE PICTURED END MILL.SOLD BY M & J TOOLING LLC DAYTON, OHIO PRODUCT SPECIFICATIONS AND / OR LABELING:CONDITION:     USEDIT IS 1-1/2" CUT DIIAMETER WITH A 1-1/4" DIAMETER SHANK. ALL INSERT POCKETS ARE...

1" DIAMETER X 2" LOC SOLID CARBIDE END MILL 4 FLUTE COATED USA MADE 1.00 2.00

YOU ARE PURCHASING THE PICTURED END MILL.SOLD BY M & J TOOLING LLC DAYTON, OHIO PRODUCT SPECIFICATIONS AND / OR LABELING:CONDITION:     USEDTHERE IS A CHIP AT 1-3/16 IN THE SIDE OF 1 FLUTE. IT IS USED BUT STILL PLENTY...

UNKNOWN

SHARP 1" SOLID CARBIDE END MILL 5-1/2 LOC 4 FLUTE CENTER CUTTING BRIDGEPORT MILL

YOU ARE PURCHASING THE PICTURED END MILL.SOLD BY M & J TOOLING LLC DAYTON, OHIO PRODUCT SPECIFICATIONS AND / OR LABELING:CONDITION:     USEDI LOOKED AT IT CLOSELY. THERE ARE NO OBVIOUS CHIPS. IT IS STILL VERY SHARP...

OTM EM0625 SINGLE FLUTE INDEXABLE INSERT END MILL 3/4" DIAMETER SHANK .75 .750

YOU ARE PURCHASING THE PICTURED END MILL.SOLD BY M & J TOOLING LLC DAYTON, OHIO PRODUCT SPECIFICATIONS AND / OR LABELING:CONDITION:     USEDTHE INSERT POCKET IS 100% INTACTSIZE / LABELING:     OTM...

KENNAMETAL

3PCS NEW KENNAMETAL 5/16 DIA 2 FLUTE CARBIDE END MILL WITH 45 DEGREE ANGLE .3125

YOU ARE PURCHASING THE PICTURED TOOL HOLDER.SOLD BY M & J TOOLING LLC DAYTON, OHIO PRODUCT SPECIFICATIONS AND / OR LABELING:CONDITION:     USEDSIZE / LABELING:     KENNAMETAL HEC312S2 5/16 DIAMANUFACTURER...

WALTER VALENITE DIA FACE MILL F4080.UB38.152.Z07.04 1-1/2" PILOT X 5/8" KEYS

YOU ARE PURCHASING THE PICTURED ITEM.SOLD BY M & J TOOLING LLC DAYTON, OHIO PRODUCT SPECIFICATIONS AND / OR LABELING:CONDITION:     USED   THE INSERT POCKETS ARE 100% INTACT.SIZE / LABELING:   ...

GREENLEAF

USED GREENLEAF 1 1/4 SHANK DIA. FACEMILL WO-1418 9-98 1.25 1.250 1.2500 USA MADE

YOU ARE PURCHASING THE PICTURED FACEMILLSOLD BY M & J TOOLING LLC DAYTON, OHIO PRODUCT SPECIFICATIONS AND / OR LABELING:CONDITION:     USEDTHERE IS SMALL DAMAGE TO WORKING END - SEE LAST 2 PICTURES INSERT POCKETS ARE...