Milling

COLORADO INDUSTRIAL

COLORADO INDUSTRIAL P4755 1/8 SHANK 3" OAL 4 FLUTE END MILL TOOLMAKER TOOLING

YOU ARE PURCHASING THE PICTURED END MILL.IT IS NEW.SOLD BY M & J TOOLING LLCDAYTON, OHIT IS LABELED: <

SGS

SGS 46356 5 mm DIA 6 mm SHANK 13 mm LOC 57 mm OAL 4 FLUTE AlTiN CARBIDE END MILL

YOU ARE PURCHASING THE PICTURED END MILL.IT IS NEW.SOLD BY M & J TOOLING LLCDAYTON, OHPRODUCT SPECIFICATIONS:

SGS

SGS 38116 1/8 DIA. 1/8 SHANK 1/2 LOC 1 1/2 OAL 4 FLUTE CARBIDE END MILL TOOL

YOU ARE PURCHASING THE PICTURED END MILL.IT IS NEW.SOLD BY M & J TOOLING LLCDAYTON, OHPRODUCT SPECIFICATIONS:

OSG

OSG 8522020 FX - MG - EDL 2 2 FLUTE END MILL MACHINIST TOOLMAKER TOOLING TOOL

YOU ARE PURCHASING THE PICTURED END MILL.IT IS NEW.SOLD BY M & J TOOLING LLCDAYTON, OHIT IS LABELED:

OSG

OSG 8543831 FX-CR-MG-EDS 3 mm DIA .2 mm RAD. 6 mm SHANK 2 FLUTE CARBIDE END MILL

YOU ARE PURCHASING THE PICTURED END MILL.IT IS NEW.SOLD BY M & J TOOLING LLCDAYTON, OHPRODUCT SPECIFICATIONS:

NIAGARA

NIAGARA N59820 .030 DIA. 1/8 SHANK .090 LOC 1 1/2 OAL 4 FLUTE CARBIDE END MILL

YOU ARE PURCHASING THE PICTURED END MILL.IT IS NEW.SOLD BY M & J TOOLING LLCDAYTON, OHPRODUCT SPECIFICATIONS:

SGS

SGS 31409 3/32 X 1/8 SHANK 4 FLUTE DOUBLE ENDED END MILL TOOLING MACHINIST TOOL

YOU ARE PURCHASING THE PICTURED END MILL.IT IS NEW.SOLD BY M & J TOOLING LLCDAYTON, OHPRODUCT SPECIFICATIONS:

SGS

SGS 38049 3/8 .030 CORNER RADIUS 4 FLUTE END MILL TOOLING MACHINIST TOOLMAKER

YOU ARE PURCHASING THE PICTURED END MILL.IT IS NEW.SOLD BY M & J TOOLING LLCDAYTON, OHPRODUCT SPECIFICATIONS:

M.A. Ford

M.A. FORD 16119680 4 FLUTE STUB DOUBLE END MILL TOOLING MACHINIST TOOLMAKER TOOL

YOU ARE PURCHASING THE PICTURED END MILL.IT IS NEW.SOLD BY M & J TOOLING LLCDAYTON, OHIT IS LABELED: M.A. FORD 16135

M.A. Ford

MA FORD 16323430 15/16 X 1/2 X 2 4 FLUTE CARBIDE TUFFCOAT GP END MILL TOOLING

YOU ARE PURCHASING THE PICTURED END MILL.IT IS NEW.SOLD BY M & J TOOLING LLCDAYTON, OHPRODUCT SPECIFICATIONS: Mill Diameter (Inch) 15/64

SGS

SGS 30010 5/16 DIA. 5/16 SHANK TI-NAMITE A COAT 4 FLUTE CARBIDE SQUARE END MILL

YOU ARE PURCHASING THE PICTURED END MILL.IT IS NEW.SOLD BY M & J TOOLING LLCDAYTON, OHPRODUCT SPECIFICATIONS: Mill Diameter (Inch) 5/16

DESIGN - RITE XL D66420982 2.5 mm DIA 3 mm SHANK 5 mm LOC 38 mm OAL END MILL

YOU ARE PURCHASING THE PICTURED END MILL.IT IS NEW.SOLD BY M & J TOOLING LLCDAYTON, OHIT IS LABELED:DESIGN - RITE XL2.5mm X 3 mm X 5 mm X 38 mmD66420982 <