End Mills

VALENITE 1-1/4" DIA SHANK INDEXABLE END MILL TL# 75514258 CUT DIA ABOUT 1-1/2"

YOU ARE PURCHASING THE PICTURED END MILL.SOLD BY M & J TOOLING LLC DAYTON, OHIO PRODUCT SPECIFICATIONS AND / OR LABELING:CONDITION:     USEDINSERT POCKETS ARE 100% INTACT.SIZE / LABELING:     VALENITE...

ADVENT TOOL CARBIDE THREAD MILL 142814-1CS 28 PITCH TPI 1/4" SHANK END MILL

YOU ARE PURCHASING THE PICTURED END MILL.SOLD BY M & J TOOLING LLC DAYTON, OHIO PRODUCT SPECIFICATIONS AND / OR LABELING:CONDITION:     NEWLENGTH OF CUT IS 0.400 CUTTER DIAMETER IS 0.190 4 FLUTE 3" LONG ...

1/2 DIA 4 FLUTE SOLID CARBIDE END MILL WITH .485 CUT DIA CENTER CUTTING HAAS CNC

YOU ARE PURCHASING THE PICTURED END MILL.SOLD BY M & J TOOLING LLC DAYTON, OHIO PRODUCT SPECIFICATIONS AND / OR LABELING:CONDITION:     NEWCUT LENGTH IS ABOUT 2" LONG. OVERALL LENGTH IS 4-1/2" (ACTUAL 4.530")SIZE /...

SGS CARBIDE 34509 SKI-CARB CENTER CUTTING 2 FLUTE END MILL W/ .031 CORNER RADIUS

YOU ARE PURCHASING THE PICTURED END MILL.SOLD BY M & J TOOLING LLC DAYTON, OHIO PRODUCT SPECIFICATIONS AND / OR LABELING:CONDITION:     NEWCUT LENGTH IS 3/4" OVERALL LENGTH IS 2-1/2" LONG.SIZE / LABELING: ...

SGS CARBIDE 33121 X 1-1/8" EXTRA LONG LENGTH CENTER CUTTING 4 FLUTE END MILL

YOU ARE PURCHASING THE PICTURED END MILL.SOLD BY M & J TOOLING LLC DAYTON, OHIO PRODUCT SPECIFICATIONS AND / OR LABELING:CONDITION:     NEWOVERALL LENGTH IS 3" LONG.SIZE / LABELING:     SGS TOOL CARBIDE...

SGS 31780 1/8" CARBIDE BALL NOSE END MILL TITANIUM TI-NAMITE CARBONITRIDE COATED

YOU ARE PURCHASING THE PICTURED END MILL.SOLD BY M & J TOOLING LLC DAYTON, OHIO PRODUCT SPECIFICATIONS AND / OR LABELING:CONDITION:     NEWSIZE / LABELING:     SGS 31780 1/8" DIAMETER CARBIDE ...

WELDON

WELDON AC28-6 FLAT ROUGHING END MILL 7/8" DIA 7/8" SHANK HSS EDP 42648 .8750

YOU ARE PURCHASING THE PICTURED ITEM.SOLD BY M & J TOOLING LLC DAYTON, OHIO PRODUCT SPECIFICATIONS AND / OR LABELING:CONDITION:     NEWMADE IN USASIZE / LABELING:     WELDON AC28-6 7/8" DIA 7/8"...

CONTROX

2pcs 1 1/4 DIAMETER HSS SHANK END MILLS REGROUND TO 1.140 & 1.117 CENTER CUTTING

YOU ARE PURCHASING THE PICTURED END MILLS.SOLD BY M & J TOOLING LLC DAYTON, OHIO PRODUCT SPECIFICATIONS AND / OR LABELING:CONDITION:     USEDACTUAL SIZES WERE MEASURED WITH CALIPERS, ALLOW +/- .005SIZE / LABELING: ...

LOT OF HSS END MILLS 3/4" & 1" SHANK BALL AND RADIUS ENDS

YOU ARE PURCHASING THE PICTURED END MILLS.SOLD BY M & J TOOLING LLC DAYTON, OHIO PRODUCT SPECIFICATIONS AND / OR LABELING:CONDITION:     USEDMOST ARE USA MADE. THESE ARE SHARP!SIZE / LABELING:     3/4" &...

ARAF 6781 BALL NOSE INDEXABLE END MILL 1/2" DIAMETER SHANK PRAMET

YOU ARE PURCHASING THE PICTURED END MILL.SOLD BY M & J TOOLING LLC DAYTON, OHIO PRODUCT SPECIFICATIONS AND / OR LABELING:CONDITION:     USEDSIZE / LABELING:     ARAF 6781. 1/2" DIAMETER SHANK. ...

INGERSOLL

INGERSOLL 16W1B1581R02 MAX-I-PEX 1-1/2" BALL NOSE END MILL X 1-1/4" SHANK

YOU ARE PURCHASING THE PICTURED END MILL.SOLD BY M & J TOOLING LLC DAYTON, OHIO PRODUCT SPECIFICATIONS AND / OR LABELING:CONDITION:     USEDSIZE / LABELING:     INGERSOLL 16W1B1581R02 ...

REGROUND USA 2" DIAMETER END MILL 1.980 DIA 6 FLUTE HSS MELIN 2.0 CENTER CUTTING

YOU ARE PURCHASING THE PICTURED END MILL.SOLD BY M & J TOOLING LLC DAYTON, OHIO PRODUCT SPECIFICATIONS AND / OR LABELING:CONDITION:     USEDIT HAS BEEN REGROUND / SHARPENED TO APROXIMATELY 1.980 SIZE / LABELING: ...