End Mills

SGS 31780 1/8" CARBIDE BALL NOSE END MILL TITANIUM TI-NAMITE CARBONITRIDE COATED

YOU ARE PURCHASING THE PICTURED END MILL.SOLD BY M & J TOOLING LLC DAYTON, OHIO PRODUCT SPECIFICATIONS AND / OR LABELING:CONDITION:     NEWSIZE / LABELING:     SGS 31780 1/8" DIAMETER CARBIDE ...

WELDON

WELDON AC28-6 FLAT ROUGHING END MILL 7/8" DIA 7/8" SHANK HSS EDP 42648 .8750

YOU ARE PURCHASING THE PICTURED ITEM.SOLD BY M & J TOOLING LLC DAYTON, OHIO PRODUCT SPECIFICATIONS AND / OR LABELING:CONDITION:     NEWMADE IN USASIZE / LABELING:     WELDON AC28-6 7/8" DIA 7/8"...

CONTROX

2pcs 1 1/4 DIAMETER HSS SHANK END MILLS REGROUND TO 1.140 & 1.117 CENTER CUTTING

YOU ARE PURCHASING THE PICTURED END MILLS.SOLD BY M & J TOOLING LLC DAYTON, OHIO PRODUCT SPECIFICATIONS AND / OR LABELING:CONDITION:     USEDACTUAL SIZES WERE MEASURED WITH CALIPERS, ALLOW +/- .005SIZE / LABELING: ...

LOT OF HSS END MILLS 3/4" & 1" SHANK BALL AND RADIUS ENDS

YOU ARE PURCHASING THE PICTURED END MILLS.SOLD BY M & J TOOLING LLC DAYTON, OHIO PRODUCT SPECIFICATIONS AND / OR LABELING:CONDITION:     USEDMOST ARE USA MADE. THESE ARE SHARP!SIZE / LABELING:     3/4" &...

ARAF 6781 BALL NOSE INDEXABLE END MILL 1/2" DIAMETER SHANK PRAMET

YOU ARE PURCHASING THE PICTURED END MILL.SOLD BY M & J TOOLING LLC DAYTON, OHIO PRODUCT SPECIFICATIONS AND / OR LABELING:CONDITION:     USEDSIZE / LABELING:     ARAF 6781. 1/2" DIAMETER SHANK. ...

INGERSOLL

INGERSOLL 16W1B1581R02 MAX-I-PEX 1-1/2" BALL NOSE END MILL X 1-1/4" SHANK

YOU ARE PURCHASING THE PICTURED END MILL.SOLD BY M & J TOOLING LLC DAYTON, OHIO PRODUCT SPECIFICATIONS AND / OR LABELING:CONDITION:     USEDSIZE / LABELING:     INGERSOLL 16W1B1581R02 ...

REGROUND USA 2" DIAMETER END MILL 1.980 DIA 6 FLUTE HSS MELIN 2.0 CENTER CUTTING

YOU ARE PURCHASING THE PICTURED END MILL.SOLD BY M & J TOOLING LLC DAYTON, OHIO PRODUCT SPECIFICATIONS AND / OR LABELING:CONDITION:     USEDIT HAS BEEN REGROUND / SHARPENED TO APROXIMATELY 1.980 SIZE / LABELING: ...

REGROUND USA 2" DIAMETER 3/4" RADIUS END MILL 1.982 DIA. 6 FLUTE HSS MELIN 2.0

YOU ARE PURCHASING THE PICTURED END MILL.SOLD BY M & J TOOLING LLC DAYTON, OHIO PRODUCT SPECIFICATIONS AND / OR LABELING:CONDITION:     USEDIT HAS BEEN REGROUND / SHARPENED TO APROXIMATELY 1.982 WITH A 3/4" RADIUS ON THE...

SECO

SECO R 217.69.00.75 3.13 310 3/4 DIA SINGLE FLUTE END MILL MISSING INSERT SCREW

YOU ARE PURCHASING THE PICTURED ITEM.SOLD BY M & J TOOLING LLC DAYTON, OHIO PRODUCT SPECIFICATIONS AND / OR LABELING:CONDITION:     USEDIT IS MISSING THE INSERT SCREW. THE INSERT POCKET IS 100% INTACT.SIZE /...

MISSING PARTS DIJET DDM2100-2.3-S100 V0022 INDEXABLE INSERT END MILL 1" SHANK

YOU ARE PURCHASING THE PICTURED ITEM.SOLD BY M & J TOOLING LLC DAYTON, OHIO PRODUCT SPECIFICATIONS AND / OR LABELING:CONDITION:     FOR PARTS OR NOT WORKINGIT IS MISSING ALL OF THE HARDWARE THE POCKETS LOOK 100% INTACT...

SECO

MODIFIED SECO R217.69-01.00-3-16 INDEXABLE INSERT END MILL 2 FLUTE 1" SHANK

YOU ARE PURCHASING THE PICTURED END MILL.SOLD BY M & J TOOLING LLC DAYTON, OHIO PRODUCT SPECIFICATIONS AND / OR LABELING:CONDITION:     USEDTHE INSERT POCKETS HAVE BEEN RELIEVED TO ALLOW FOR THE LARGE RADIUS INSERT...

MILLSTAR

MILLSTAR SFCY-0750-6.0-0750 PROFILE MILLING PROFILE TOOLS END MILL 3/4" SHANK

YOU ARE PURCHASING THE PICTURED END MILL.SOLD BY M & J TOOLING LLC DAYTON, OHIO PRODUCT SPECIFICATIONS AND / OR LABELING:CONDITION:     USEDTHE SHANK HAS BEEN MODIFIED NEAR THE CUTTING END AND A FLAT ADDED ON THE SHANK...