SGS 6mm Diam, 19mm LOC, 6mm Shank Diam, 50mm OAL, 3 Fl Carbide Square End Mill
SGS
$20.39
Write a Review
SGS
SGS 6mm Diam, 19mm LOC, 6mm Shank Diam, 50mm OAL, 3 Fl Carbide Square End Mill
YOU ARE PURCHASING THE PICTURED END MILL.
IT IS NEW.
SOLD BY M & J TOOLING LLC.
DAYTON, OH
PRODUCT SPECIFICATIONS AND OR LABELING:
| Mill Diameter (mm) | 6.00 |
| Mill Diameter (Decimal Inch) | 0.2362 |
| Number of Flutes | 3 |
| Length of Cut (mm) | 19.00 |
| Length of Cut (Decimal Inch) | 0.7480 |
| Material | Solid Carbide |
| Finish/Coating | AlTiN |
| Shank Diameter (mm) | 6.00 |
| Single or Double End | Single |
| Overall Length (mm) | 50.00 |
| Center Cutting | Center Cutting |
| Flute Direction | Right Hand |
| Cutting Direction | Right Hand |
| Flute Type | Spiral |
| Helix Angle | 30.00 |
| Mill Diameter Tolerance (mm) | +0.000/-0.050 |
| Material Grade | Micrograin |
| Chipbreaker | No |
| Extended Reach | No |
| Shank Diameter Tolerance (mm) | +0.000/-0.008 |
| Series/List | 5 |
I USUALLY SHIP (95%) OF MY LISTINGS SAME DAY IF PAID FOR BY 3:00 P.M. EST.
I WILL SHIP WORLDWIDE.
I WILL COMBINE SHIPPING WHENEVER POSSIBLE.
PLEASE SEE MY OTHER LISTINGS FOR MORE GREAT VALUES!
THANK YOU!
LOCATION: 11-3-E-5