ISCAR 2 1/2" O.D. HELIDO FACE MILL S845 F45SX D2.5-5-1.0-R16 1" PILOT 45 DEGREE - MH3115AG3
$253.99
Write a Review
ISCAR 2 1/2" O.D. HELIDO FACE MILL S845 F45SX D2.5-5-1.0-R16 1" PILOT 45 DEGREE - MH3115AG3
YOU ARE PURCHASING THE PICTURED FACE MILL.
SOLD BY M & J TOOLING LLC
DAYTON, OHIO
PRODUCT SPECIFICATIONS:
CONDITION:
USED
PLEASE SEE PICTURES FOR CONDITION. ALL INSERT POCKETS ARE 100% INTACT. ALL HARDWARE IS IN IT.
CUTTING DIAMETER & LABELING:
2 1/2"
S845 F45SX D2.5-5-1.0-R16
THE 2-1/2" DIAMETER IS MEASURED NEAR THE POINTS OF THE INSERTS AT THE FACE. THE MAJOR DIAMETER IS ABOUT 3-1/8"
PILOT / ARBOR DIAMETER & KEYWAY WIDTH:
1" PILOT PILOT DIAMETER
3/8" KEY KEYWAY WIDTH
MANUFACTURER / BRAND:
ISCAR
SOLD BY M & J TOOLING LLC
DAYTON, OHIO
PRODUCT SPECIFICATIONS:
CONDITION:
USED
PLEASE SEE PICTURES FOR CONDITION. ALL INSERT POCKETS ARE 100% INTACT. ALL HARDWARE IS IN IT.
CUTTING DIAMETER & LABELING:
2 1/2"
S845 F45SX D2.5-5-1.0-R16
THE 2-1/2" DIAMETER IS MEASURED NEAR THE POINTS OF THE INSERTS AT THE FACE. THE MAJOR DIAMETER IS ABOUT 3-1/8"
PILOT / ARBOR DIAMETER & KEYWAY WIDTH:
1" PILOT PILOT DIAMETER
3/8" KEY KEYWAY WIDTH
MANUFACTURER / BRAND:
ISCAR
THANK YOU FOR YOUR BUSINESS!
LOCATION: WB14-2-3-3